How to Fix the Kernel Security Check Failure Error?

There are a number of BSOD errors, and the most common blue screen of death error is the kernel security check failure error. It may happen when there is a glitch in the Windows OS. At times, this error shows up when users update the RAM. So, if you would like to fix this common issue on your Windows 10, then here are some instructions mentioned below.

Scanning the System for Viruses

You should scan the system for viruses by pursuing these solutions mentioned below:

  1. Launch the Settings application.
  2. After that, reach the section of ‘Update & Security.’
  3. Then choose the ‘Windows Security’ option through the left pane.
  4. You should reach the right pane and select the ‘Open Windows Defender Security Center’ option.
  5. Now, click on the ‘Virus & threat protection’ option, and choose the ‘Quick scan’ option.

Check the Hard Disk for Errors

You should check the hard disk for errors by pursuing these solutions mentioned below:

  1. Hold the Windows and R keys simultaneously to launch the Run box.
  2. After that, input ‘cmd’ into it and select the OK button to launch the Command Prompt.
  3. Once it’s open, right-click on it, and choose the ‘Run as administrator’ option.
  4. Once you reach the command line, input ‘chkdsk c: /r’ into it and press the Enter button.
  5. Now, you have to wait to finish the process.

Run SFC

You should run SFC by pursuing these solutions mentioned below:

  1. Hold the Windows and R keys to launch the Run box.
  2. Thereafter, input ‘cmd’ into the box and hit the Enter key to launch the Command Prompt.
  3. After opening, right-click on it, and pick the ‘Run as administrator’ option.
  4. In the command line, insert ‘sfc/ scannow’ and hit the Enter key.
  5. This process will take some time.
  6. Now, reboot the system.

Perform DISM

You should perform DISM by pursuing these solutions mentioned below:

  1. Hold the Windows and R keys to launch the Run box.
  2. Then insert ‘cmd’ into the Run box and then hit the Enter button to launch the Command Prompt.
  3. After invoking, right-click on the Command Prompt, and choose the ‘Run as administrator’ option.
  4. Once you reach the command line, copy and paste the following lines individually, then hit the Enter key after each: 
    1. DISM /online /Cleanup-Image / ScanHealth 
    1. DISM /Online /Cleanup-Image /RestoreHealth

5.   Now, wait for the solution.

Running the BSOD Troubleshooter

You should use the BSOD troubleshooter by pursuing these solutions mentioned below:

  1. Launch the Search section.
  2. Afterwards, insert ‘settings’ into it and hit the Enter key to invoke the Settings.
  3. Go to the ‘Updates & Security’ option, click on it, and then pick the Troubleshoot button.
  4. You should click on the ‘Blue Screen’ option and reach the ‘Run the Troubleshooter’ option.
  5. Later, follow the remaining on-screen steps and let the procedure complete.
  6. Now, reboot the system.

Leave a Reply